Door Frame Repair

A malfunctioning door, especially if it is a main entry door, can be quite a hassle. Problems involving sticking or difficulty getting the door to latch properly can make coming in and leaving the house a chore in itself, never mind if you’re trying to carry groceries or a small child! Sometimes, the door frame is the culprit in this situation. Instead of sanding down part of the door itself, you may simply need to realign or otherwise alter the frame.

Quick Door Frame Repair
While door frame repair is not always a simple task, in some cases, the fix is a relatively easy one. Binding, for example, is often caused by the door frame settling or an out-of-plumb hinge jamb. To fix a binding door, install a shim under the top hinge, if the bind is near the bottom, or under the bottom hinge, if the bind is near the top. If the door hinge jamb is not plumb, shim under whichever hinge will cause the door edge to hang truly vertical. Built-up paint can cause this problem, and simply needs to be cleaned out.

To install a shim, support the door, remove the hinge jamb screw, and cut thin cardboard to fit into the mortise, under the hinge flap. Replace the screw, driving them through the cardboard into the jamb.

Door Frame Repair or Replacement
If your door frame is old, putting in a shim might not be an effective tactic. Old wood door frames can warp over time and cause the door to bind or swing open when you don’t want it to by hindering latch function. In this scenario, it might be a good idea to simply purchase and install a new door frame instead of repairing the old one. To compare, see the average door installation cost. If this is happening on a newly installed door frame, you may be able to send it back to the manufacturer to have it repaired or replaced.

Aesthetic Door Frame Repair
Sometimes door frame repair is meant to enhance form rather than function. Removing old door frame trim (sometimes referred to as “molding” or “casing”) and replacing it with a different style can make a dramatic difference in the look of the door, and the room or wall the door occupies. Removing and replacing trim is a relatively easy operation, but requires some patience if you want to keep the surrounding paint intact. If a single section of trim is damaged and you want to replace it, it is likely that you’ll be able to find a matching piece of trim at a home improvement store. Even if the trim you’re replacing is very old, many classic styles are still available. You’ll probably be able to find a matching replacement easier than you think!

Door Frames and Foundation Issues
If you have only one door that is misaligned, chances are that door or door frame repair is going to solve the problem. If you notice, however, that many of your doors and windows seem to be misaligned, you could have bigger problems. One of the classic symptoms of an unstable foundation is the sticking and binding of doors and windows around the home. Though this problem can be attributed to several things, noticing a series of misaligned doors and windows definitely warrants a professional inspection.

Install Window Hardware

Before you can install window hardware, you must first choose the window hardware that’s best for your windows. This may sound like an easier job than what it actually is. By the time you’ve selected a double-glazed, low E glass replacement window, you’ll probably feel like you’ve made all the decisions you need, when you’ve just scratched the surface. Window design and hardware have more options than window glaze, and the choices are a lot less cut and dry. Some designs are more complicated but allow for greater window operating flexibility. Simpler designs, on the other hand, may have fewer parts that can deteriorate and require repair.

Window Hardware Basics
This is far from a comprehensive list, but here are a few common window hardware items that you may be dealing with, depending on the type of window you decide you want. Most homeowners, naturally, are looking for window hardware and window companies that will install windows that have the least likelihood of falling into disrepair.

  • A crank arm is a finger-length rod used to open steel case windows.
  • A butterfly window-opening device is similar to a crank arm but smaller and ideal for windows that have shades that hang inside the sill. This device can be a straight arm or rounded.
  • Window locks and latches can be sliding locks, padlocks, hook locks, or key locks.
  • Window sash and balance design that keeps your sliding window operating smoothly.

Window Hardware Professionals
Any number of people can offer advice on your window hardware. Even your neighbor probably has a reasonable amount of experience with different windows throughout the years. Architects have a general knowledge of home structural design, including windows, but probably lack the specific expertise to choose between different window hardware options. Interior designers are great sources of information and advice on any number of home design options, but you’ll need to find a designer who has knowledge in the function and performance of window hardware, not just its appearance. Window installation professionals are probably your best bet for an expert opinion on window hardware.

Curtain Hardware/Drapery Hardware
Hardware of this type is also sometimes referred to simply as window treatment hardware. As counterintuitive as it may seem, there are probably more types of curtain and drapery hardware available than standard window hardware. The reason for this is simple. More than a simple curtain rod, many homeowners want their curtain hardware to be invisible. Holdbacks, swag holders, and drapery pins are just some of the mechanisms that can create invisible curtain hardware. Even visible or partially visible curtain and drapery hardware is available in a number of different designs and finishes to match your home decor.

Designs Art Prints Add a Fun Element to Your Kids’ Room

No doubt, the brand has paved its way to the top names in home decor and has become a favorite of those who have a love for opulent accents that redefine your home interiors. With its unmatchable accents and accessories that are known for their craftsmanship, quality and style, Belle and June has become the most preferred online boutique that makes unique and beautiful items easily accessible to every general consumer. The portal is happy to announce yet another feather in its cap, the amazing range of nursery wall art designs by Sugarboo Designs Art Prints that can be your perfect selection to add an aura of fun, creativity and beauty to your kids’ room.

Contemporary interior designers are leaving no stone unturned to transform each and every space of your house into a definition of beauty, persona and uniqueness; then how can your child’s room be left out? A child’s room is the place where he or she spends a large part of the day and so it definitely needs to reflect his or her personality. As such, Belle and June brings to you Sugarboo Designs Arts Prints, that is a coveted name in nursery room decor and wall art to transform your child’s room into a space that will certainly be your child’s most cherished room. Your child’s room will certainly be a reflection of your love for him or her.

Nursery Wall Art is loved by every child. Not only does it inspires your child but also helps in his or her visual development and instills creativity in them. There are millions of ideas when it comes to wall decor to inspire your kids. So, decorate your little angel’s room with sentimental and original nursery wall art designs by Sugarboo Designs Arts Prints. There are dozens of designs both for girls’ and boys’ rooms. You can transform your child’s room into anything from and African Safari to an Arabian desert or a fairyland. You can also go for the exclusive range of smart wall stickers to create temporary art that can be changed easily as per the taste and preference of your child. Moreover, there is a huge collection of other nursery room decor accents featured in the Belle and June online boutique that can be the perfect elements to add a unique touch to your child’s room. From colorful wallpaper to decorative wall stickers and lovely mirrors to fun and inspiring framed quotes, you can give your child every piece of your inspiration and love from the assorted range nursery room decor by Belle and June.

Interior Painting Considerations & Ideas

Few additions transform the interior of your home more than a new coat of paint. Interior paint adds variety, color, and a touch of your personality to any room. Different interior paint colors can also be a great design tool, making larger rooms feel cozier and smaller rooms feel more spacious. Here’s a few tips when it comes to choosing paint for inside your home, so that you can feel confident you’re making the right paint decisions for your interior spaces.

Overwhelmed by the Options?

Most homeowners do feel overwhelmed when it comes to choosing paint for the interior spaces of their home. It’s understandable, since there are literally thousands of colors to choose from. First and foremost, look for colors that are pleasing to you. Check your closet and take a long look at your wardrobe. The colors you see there are the ones you feel most comfortable in, and which best reflect your personality. Determining a baseline is always a good place to start, and makes for a great jumping off point when you pick up the color wheel at your local hardware store.

Think Design when Choosing Interior Paint

Besides choosing a color that reflects you, you also want to think about what impact different interior paint colors are going to have on different spaces. Light interior paint colors make a room feel more spacious, and are an excellent choice if you’re dealing with tight, confined spaces. Darker colors work the opposite, and are best suited for larger, spacious areas where you want to reign things in a little bit. On the flip side, darker colors are also more comforting and inviting, making them perfect for entryways, living rooms, and other areas where you entertain guests. Lighter colors lack the warmth of darker shakes, making spaces feel more formal and proper.

To Prime or Not to Prime

Once you’ve decided on interior paint colors, many homeowners are unsure whether a primer coat is necessary before applying the paint. The answer to this question is always “yes.” You might be able to get away without priming, especially if your new coat closely resembles the old paint in color, but a good coat of primer does more than just cover up the old paint. It also provides an ideal surface for your finish paint to adhere to, meaning your new paint job is going to look better, and last longer, than if you use a finish paint all by itself.

Flat, Satin, Eggshell, Semi-gloss, and Gloss

The last decision you’re going to need to make is which type of paint to use in each area. Flat paint is great for uses in areas that receive low traffic, and that you want to de-emphasize. Sitting side by side a high gloss variety, flat paint will be passed over every time. Satin, eggshell, and semi-gloss paints are better for high traffic areas, since they resist staining and are easier to clean than flat paints. And if you really want an area or architectural feature to get noticed, use glossy paint to get that perfect shine. Of course, remember, the glossier the paint, the more you’ll notice imperfections in the painted surface as well. For all these reasons, most homeowners choose the middle ground, and apply a semi-gloss or satin finish for their interior paint needs.

Consider Hiring a Professional Painter

Interior painting is certainly one of those home improvement jobs that any homeowner can tackle on their own. You’ll need the proper equipment (paint trays, tape, good brushes, rollers, ladders, and drop cloths), and a few weekends to get the job done, but this home improvement isn’t rocket science. Still, you might want to talk to a professional painter nonetheless, just to get an idea what they charge, and to mine for any ideas they might have for your home. Professionals are up on the newest design trends, paint innovations, and painting techniques, not to mention they can offer wall texturing and other services that are beyond the reach of most homeowners. If you’re thinking about adding a new coat of paint to the interior of your home, talk to a professional painter about your full range of design and paint options.

Deck Railings for Summer Safety

Deck Railings for Summer SafetyDeck railings are available in a wide variety of styles, materials, and designs; but when it comes down to it, all deck railings are meant to perform the same job no matter what they look like. A deck is a great place to hang out or entertain when the weather’s warm. Deck railings are there to make sure that large objects don’t fall off the deck and injure someone below; they’re also designed to keep a small stumble from turning into a 15 foot drop.

Making the most of a Deck Wall
The exterior wall of the house that the deck is built onto can be a great asset. Anchoring the railing to the deck wall is a way to increase the stability of the railing. The deck wall is also a good place to install outdoor lighting. Though this wall will often have a small light already in place, putting up additional lights is often a necessity for safety and nighttime card games, alike.

Deck Railings and Building Code
As building codes vary greatly from place to place, make sure to check out what it is in your area before you shop for materials. In most places, deck railings are supposed to be a certain height, and the balusters need to be spaced at certain intervals, but in some cases, what you build your railings out of is also an issue. Deck railings around a pool will often be subject to different codes, as well.

Comparing Deck Railing Materials
Of course, the most common material used for this type of railing is wood, and it is often the same type of wood used to build the deck itself. However, because the amount of lumber used for deck railings is far less than what is used for the deck, some people opt for a more exotic wood as an accent.

Railings, especially those on stairs, will come into contact with a lot of hands. This makes them splinter territory. No matter what you build the deck out of, make sure that the railings are constructed of a durable wood that is sealed and treated to prevent splintering.

A safe railing needs to be strong enough to not budge if a person falls into it. For this reason, many homeowners choose metal railings or metal reinforcements for wood railings.

Composite and plastic lumber decking is becoming more and more common as people become more environmentally conscious. These materials can certainly be used to create the railings, as well. The problem here is that these materials haven’t been popular for very long, so it is hard to say what their performance will be like over many years. If you are thinking of using plastic or composite for your railing material, check with the manufacturer about which of their models has tested best (and about the warranty, too).

The Best Look
The last, but certainly not the least thing, to consider is how will your deck railings look in conjunction with your house. There aren’t any concrete rules here, but those who are thinking about painting the railings (or leaving them unfinished) should do some research on the various materials available. Some will take paint or stain extremely well, while others can hold up for decades without any finish at all.

Boiler And Plumbing Repairs

In case you feel like your home is not safe and well-functioning anymore and feel insecure about the plumbing and pipework, you should have it checked by a Boiler Repairs London or Boiler Servicing London team of experts. Why is that? The reason is due to the fact that solely a competent and authorized team of plumbers or boiler and central heating repair specialists possess the necessary experience, expertise and the right tools to not only checkup the installations in your house, but also come up with effective solutions to all problems.

Nowadays it is extremely hard to put your trust in companies or individuals who might seem driven solely by profit. Also, experience seems to lack in many of them and, when requested certificates or Boiler Repairs London and Boiler Servicing London authorization, they adopt a wrong attitude. So, in order to do routine checkups on your house and make sure all problems will disappear, whom can you call?

You should note that not all businesses are the same. Placing values and ethics above profits, Squires and Duran Plumbing and Heating Ltd was founded in 1998, with a view to providing a fast, reliable and affordable plumbing and heating service. This company is headed by Proprietor Xohan Duran, an amazing individual who knows how to build up a solid team and create the right work ethic and atmosphere for both the Boiler Repairs London or Boiler Servicing London experts and the customers to be content.

Owner of Squires and Duran Plumbing and Heating Ltd will not hesitate to share his expertise in his upcoming book ‘Consumer’s Guide to Boiler Replacements’. His work explains everything you need to know about boiler replacement – from finding a registered engineer, to getting the best deal on the market and completing the paperwork required. To put it shortly, it represents a handy guide to help ensure you get the best in workmanship, value and support.

Initially focusing on domestic clients, then moving on to commercial ones, the aforementioned business has worked with customers, advising them of the simplest, most cost-effective ways to resolve their issues. It has and continues to serve the following areas: North London, Finchley, Barnet, Golders Green, Islington, Enfield, Borehamwood, Hampstead Garden suburbs. If you live nearby any of these areas and require a plumber or Boiler Servicing London specialist, the employees of Squires and Duran Plumbing and Heating Ltd may still be able to come to you. Get in touch with them to ensure availability.

Important Steps to Replace Garage Door Panels

Your garage door panels may be damaged or dented through misuse or they might be tired and old after being used for many years. Whatever the reason it is important that you replace panels for your door’s functionality to be improved. Always make sure that you buy the right ones. Also, check the model and the make of the existing door because even if it looks similar it may not fit well if the wrong type is chosen.

Ideally, garage door panels make the better part of a garage door. Since they compose of the main door, you should always check whether you are working well. Remember, there are different types of panels including roller garage doors, slide up, sectional and single paneled garage doors. Because each type has a different number finding a replacement might prove tricky depending on how you want to go about it.

Measure the panels

Returning a wrong panel is another difficult task. In order to avoid this mistake measure your garage door panels and ensure that you are 100% accurate before ordering anything. You should compare the width and the length of your measurements with the size of your other panels. Once you are done with all the measurements you can go ahead and order.

Order the panels

Establish who manufactured your garage door before you order. If your garage door is much older it is in order to contact the manufacturer directly. Otherwise, ensure that you order the correct number of garage door panels. You can easily do this through a local company that sells them.

Remove the panels

Before doing this, ensure that your automatic garage door opener is unplugged if you have on fitted. Next, open the garage manually and remove the springs. If you fail to do this there are high chances that the door could burst open while working on it which could injure you or damage the new ones. Remember, you are going to have to remove it one by one unless they are at the top.

Replace the panels

To put in the new panels, slide the rollers and lower them until they are touching them. These will still be in place on the garage door. Next, attach both the new and the old panels together. This depends on the existing fastening. Reattach all the panels the way they were until the door is back in place. Finally, test the garage door by using the opener to check if the panels are sliding up and down smoothly.

Bottom line

Remember, replacing your garage door panels can be a very hard task if you do not follow the correct procedure. Essentially, measure your panels to ensure that they will fit well. If you are not sure, contact an expert.